• 2210 South Front Street • Melbourne, Florida 32901 • (321) 725-9054 •
Fax: (321) 729-8400 • E-mail: melbourneharbor@aol.com

• Great Facilities • Great Service • Great Location •

 For more information on this vessel, 
please contact David A. Cesario at:
(321) 725-9054
E-mail: Mhdockmaster@aol.com

 

      


      
46' Durbeck Great Cabin

• Year: 1981
• $195,000
• Hull Material: Fiberglass
• Engine/Fuel Type: Single Diesel
• Located in Melbourne, Florida


Builder: The Durbeck Yard      Designer: Will Durbeck

Dimensions: LOA - 47' 7"     LWL - 35'8"     Beam - 13'6"
Draft - 5'6"     Bridge Clearance - 56'     Displacement - 51,500 lbs.
Ballast - Lead

Engine: 85 HP Perkins Diesel, Model 4-326     Hours - 1190
Cruising Speed - 6 knots     Max Speed - 8.5 knots

Tankage: Fuel - 185 gal.     Water - 185 gal.

Accommodations: All cherry wood interior. Forward berth
offers two bunks to starboard with a sink, head and shower
to port. A port-side walkthrough leads to the master stateroom
aft, offering center double berth with a head and shower.
Heads are Lectrasan. There is ample storage throughout.

Galley: Large porcelain on cast iron sink, hot/cold pressure
water, Princess 3-burner propane stove with oven. Adler
Barbour 12V Cold Machine for fridge and freezer.

Electronics: Raymarine depth indicator, Raymarine wind
and speed, Benmar Course Setter 21 auto pilot.
Standard Horizon 78 VHF, hand-held GPS, SSB Long
Wire Antenna, Danforth Constellation 5" compass.

Electrical: (2) 120V 30-amp shore power connections,
Sentry 40 battery charger, Desi-Petter 6.5KW generator.
(6) Trojan Batteries - (2) size 24 for starting, (4) size 27 
deep-cycle for ship's service.

Deck: 35lb. Danforth anchor w/20' of chain and 300' of
3/4" nylon rode. 60lb. Danforth plow w/150' of 3/8"
chain rode. 60lb. Fisherman storm anchor. (2) horseshoe
buoys, cockpit cushions, (2) opening hatches, awning,
(2) solar vents, double life lines, spreader lights,
Whale manual bilge pump in cockpit, (2) 20 lb. aluminum
propane tanks in deck box.

Sails: Main with 4-part sheet on a traveler, (1) hank on
storm jib, mizzen, staysail. Winches - (4) Barlow #27
self-tailing primaries and #23 sheet winches.
All stainless steel rigging w/Staloks and heavy duty
chainplates. New Furlex roller furling with Bremen
110% headsail. Famet masts and roller furling on all
main, mizzen and staysail.

Comments: Custom built in Florida, this flush deck
cutter ketch offers great accommodations and a superb
offshore sailing vessel. Designed by Will Durbeck and
built at the Durbeck Yard by top professionals. Price
reduced from $275,000. And serious sailor will find the
quality of this vessel to be top notch.













































Click HERE to go back.